Pricing
Category
Brand
Search code
05D075TR
Specifications
Shaft type
Straight Ø6 with 2 mm key
Ø Fitting edge
22 mm
Stroke volume / Pump group
0,63 cc (group 0.5)
front flange
2 hole
Direction
CW
Operating pressure
190 bar
Hydraulic connecting ports
BSPP-ports (GAS)
Special edition
Reinforced shaft seal
Single-For-Between-End
Single
Extra
Datasheets
Attachment | Size |
---|---|
Tandwielpomp 0.5D0.75-TR - P1.02020.pdf | 369.3 KB |
Speciale uitvoering TR_0.pdf | 107.1 KB |
Group | 0.5 |
Medium | Hydraulic oil |
Viscosity (cSt) | Allowed 6-500, recommended 10-100, start |
Working temperature pump | -15⁰ - +80⁰C |
Pressure (continue) | 190 bar |
Max. pressure (intermittent) | 210 bar |
Max. peak pressure | 230 bar |
Inlet pressure | max. 6 bar |
RPM (maximum) | 7000 rpm |
RPM (minimal) | 1000 rpm |
Efficiency | 93% between 1000 - 3000rpm |
Ø Axe | 6 mm |
Thread size shaft Ø | M6 |
Shaft length (incl. fitting edge) | 21 mm |
Ø Fitting edge | 22 mm |
Ports | BSPP-ports (GAS) |
Thread inlet | 1/4" BSP |
Thread outlet | 1/4" BSP |
Ø Mounting hole flange | See datasheet (if available) |
Material front and back cover | Aluminium |
Material housing | Aluminium |
Sealing | NBR |
Material gears | Special hardened steel |
Pump type | ELIKA (low noise) |
Displacement/group | 0,63 cc (0.25 - 0.5) |
Direction | CW |
Flow at 1500 rpm | 0,94 l/min |
Shaft-type | Straight axe |
Datasheets | See datasheet (s) for more product information (if available) |
Remark | Reinforced shaft seal |