Pumps

We are the official distributor of Marzocchi ELIKA® for the entire Benelux and also stock warehouse worldwide.

 Eckerle – your experienced partner Innovative solutions by experts for experts 
Since it was launched back in 1968, the ECKERLE system high pressure internal gear pump has conquered the world; and rightly so – because it combines unparalleled efficiency with the best possible price/performance ratio.

Top quality ensures our customers’ success. That was our founder Otto Eckerle’s maxim, and it is still our most important value 80 years later. One of the pioneers in oil hydraulics, Otto Eckerle built the company with inventiveness,
commitment, courage and hard work. He grew the company into a world leading hydraulic brand with his revolutionary ideas and ground breaking developments.

The key to its winning values is its innovative design in which the drive gear runs eccentrically inside the internal gear. The medium – hydraulic oil,  for example – is pumped through the spaces between the cogs of both gears,
with the split crescent acting as a seal. EIPS – an innovation made even better The EIPS series is specially designed to stand up to the tough demands of mobile hydraulics. The pumps in this series are the result of our decades of experience
in developing internal gear systems. Key features are their very low noise levels, outstanding efficiency and long service life. Make our internal crescent pump’s unique advantages over conventional hydraulic pumps work for you to gain a decisive lead over your competitors now!

Besides our standard pumps, the bulk of the other products we have designed and made at Eckerle over the decades are custom made solutions designed specifically to meet our customers’ needs. Just as every job a pump has to do
may be different, every system has to be different too. With our solutions we make it as easy as possible for you to stay ahead of your competitors

Application:
pump for fan drive: highly efficient, lower engine HP consumption, reduces emissions

pumps for steering, braking system, powered convertible top, active suspension, differential oil cooling, hydraulic attachments, hydraulic assist transmission gear shifting

One system, many solutionsWith the internal gear pump at the heart

Your benefits at a glance:
• reliable
built with high-precision, tried-andtested construction methods
• low-noise
system designed for low pulsation
• long service life
much less wear, so maintenance-free for many years
• sustainable energy-efficient with lower power
consumption and lower emissions
• convenient easy and quick to install due to
optimized design to fit in your space

Eckerle internal gear pump
+ no valve block needed for valve
integration
+ fewer hoses needed
+ no pressure filter needed
+ highly efficient, less heat
generation, low-energy consumption
+ longer running time
+ long service life
+ cheaper to maintain

From conceptual idea to a final finished product
Working together we will make it happen
 

EIPS2

Drive shaft
options, spline shaft or tang shaft with cross coupler (Oldham)

Winning features:
• internal gear pump with axial and radial
gap compensation
• radial compensation with segments
• customized suction and pressure ports
• front cover die cast aluminium
• valve cover with cast channels
• application: mobile hydraulics, e.g. forklifts
• direct mounted
• low-noise
• long service life
• low pulsation (pressure pulsation ~2%)

EIPS3

Winning features:
• internal gear pump with axial and radial
gap compensation
• radial compensation with segments
• axial suction and pressure port
• extruded aluminium cover
• application: mobile hydraulic, e.g. high stacker
• mounted directly with tang shaft engagement (cross coupler)
• cast-iron end plate with integrated valve technology

EIPH – the consistent development of an innovative product

The basis of this excellent performance is innovative design. The teeth of the outer gear engage with the teeth of the eccentrically mounted inner gear. The medium, hydraulic fluid for instance, is pumped between the gaps in the teeth of the two gears, while the split filler piece seals the teeth.

The ECKERLE   EIPH series was specially developed for use in industrial application and its high hydraulic standards. The pumps in this series are the product of decades of experience in the development of internal gear systems. They are distinguished by their exceptional quietness, very good levels of efficiency and long life span while being exposed to high pressure.

Gain a decisive leading edge over your competitors by using these unique benefits over traditional hydraulic pumps to your advantage. Since its development in 1968 the ECKERLE system split gap compensated high pressure internal gear
pump has tread a triumphant path. For good reason, as this system is unrivalled in its combination of exceptional efficiency and best value for money.

Committed to the environment – right from the start

Eckerle industrial pumps are distinguished by their exceptionally high level of efficiency. This major factor brings not one, but two benefits:

Firstly, it helps you to use less energy on a day-to-day basis while achieving targets with greater efficiency; and
Secondly, it helps us converse our natural resources. A firm upholder of this belief, Eckerle has been environmentally certified to ISO 14001 for many years.

Our multi-flow pump combinations can be tailored to your specific requirements   EIPH EIPC

Whatever your individual needs may be – our multi-flow pumps satisfy them reliably, thanks to their modular design. Eckerle industrial pumps can be combined appropriately as the situation demands.
Whatever your wish or need, from efficiency-optimised modular hydraulic systems or inputs for servo applications over a bypass circuit to stand-alone pumps, you can depend upon Eckerle to put together exactly the system that suits
your needs.

Type H and Type C series can also be combined:

DVA – highly dynamic and energy-efficient at any speed The internal gear pump as the centrepiece

Minimum energy consumption and top performance – this is the principle on which a revolutionary and powerful drive package for hydraulics was developed.

The DVA is an internal gear pump driven by a servo inverter, powered in turn by a synchronous servo or asynchronous motor depending on the implementation field. Experts optimally tailor and scale the performance and function of pumpdrive, software and motor to suit the customers' needs. As an innovator in the industry we offer a unique concept, the variable speed drive system, which is subject to continuous development and improvement. Typical implementation areas of variable speed drives include plastic injection machines, presses and general mechanical engineering and any general machine application that can benefit from on-demand flow and/or pressure capabilities, as well as retrofits of existing hydraulic systems

Reduction of pump speed in partial load range or outside the machine cycle

• Energy saving of up to 70 % for machines with process-related cycle intervals
• Noise reduction of up to 20 dB (A) during cycle, 100 % in cycle intervals

• Significant reduction ofoverall operating costs
• Fewer noise insulation measures necessary Occupational guidelines are satisfied faster and less expensively
• lower heat generation

Constant flow internal gear pump replaces a sophisticated variable axial piston pump

• Size reduction by up to 60 % through speed increase
• Exact pressure and flow control

• Reduction of pump costs
• Reduction in additional proportional valves

Highly dynamic pressure and flow control with servo pumps without proportional valve system

• Thanks to actuator processes initiated directly from the pump hydraulic power loss in the system is reduced
• Exact information on current pump delivery volume from sensors on the motor and stored volumetric efficiency characteristics
• Soft highly dynamic control of all actuators

• No or simpler cooling system
• Lower investment and operating costs
• Extended life span of components
• Cost saving on fluid management
• Reduction in measuring systems
• Reduction in safety functions
• Simpler system due to controlling without proportional valve system
• Shorter cycle times

QX High pressure internal gear pumps
The QX pumps are the 5th generation Bucher internal gear pumps. They have proven themselves over the last thirty years and the simple design ensures a long life without the need for extensive maintenance. Sequential and multiple pumps are available worldwide in more than 1000 variants. The advantages of this pump are; suitable for high pressure, low noise, long life and negligible flow and pressure peaks.

The QX twin pumps consist of two single pumps mounted on a common drive shaft. Hydraulically, the two pumps operate independently of each other, but they share a common suction connection in the center of the pump. The largest pump of the combination is located at the end of the shaft (the drive side). With equal pump dimensions, the pump with the largest displacement is on the drive side. These pumps can be used in hydraulic presses, machine tools, waste presses, painting machines, hydraulic power units, elevator cars and elevator/lift controls.

QXV internal gear pumps
The QVX is a internal gear pump for low viscosity fluids. This pump is capable of developing pressures of 300 bar with high efficiency at a viscosity of around 1 mm²/s. The QXV- internal gear pump is used with great success to pump aviation jet fuels, paraffin oil/kerosene, brake fluid, pentosine and HFA fluids.

What are the benefits of the QVX?
The QVX-pump has a low level of noise, excellent efficiency, long life, low pump wear, low cavitation sensitivity and good emergency operation characteristics. Finally, the QVX internal gear pump can develop 300 bar at a viscosity of around 1 mm²/s.

Where is the QVX used?
The QVX is used in installations for testing jet A1/fuel drives for aircraft turbines, test installations for diesel injection pipes, rolling mills, fuel pumps for gas turbines, welding machines and lubrication pumps for shaft bearings.

Marzocchi ELIKA® tandwielpompen (geluidsarme pompen) ELIKA® pompen zijn extreem stille tandwielpompen, toepasbaar in situaties waar lage geluidsniveaus wenselijk zijn.
Door het gebruik van een geluidsarme ELIKA® tandwielpomp worden schadelijke geluiden voor mens en omgeving geëlimineerd. Dankzij de unieke vormgeving van de tandwielen is het rendement al aanwezig bij een laag toerental vanaf 400 omwentelingen per minuut. Ook leverbaar als meervoudige pomp.

eckerle EIPC industrial pump with aluminium housing

The EIPH and EIPS2-S111 series were developed especially for use in industry and its rigorous demands on hydraulics. The pumps in this series are the result of our decades of experience in the development of internal gear systems. They feature especially low-noise operation, excellent levels of efficiency and long service lives at high pressures. Press technology, general Machine tool industry, Paper industry, Conveyor and lifting technology, Plastic and rubber injection technology, Energy-efficient speed-controllable servo drives.

Berarma - regelbare schottenpompen tot 250 bar we hebben een breed scala aan regelbare hydraulische schottenpompen leverbaar uit voorraad. Hydraulische schottenpompen zijn erg stil, leveren een hele constante opbrengst (weinig pulsatie) en kunnen worden toegepast tot 250 bar. Daarnaast zijn hydraulische schottenpompen met diverse regelingen te verkrijgen.Ook als dubbelpomp uitvoering te krijgen in combinatie met andere pomptypes

Oudshoorn hydraulics beschikt over een compleet pakket met handpompen (PMS) en (PMI) uitvoeringen die standalone kunnen worden toegepast maar ook worden uitgevoerd met oliereservoir. Elke handpomp levert opbrengst bij zowel trekkende als duwende beweging, daarnaast is het mogelijk om een handpomp te kiezen met ontlastklep (voor enkelwerkende toepassingen) of met stuurschuif (voor dubbelwerkende toepassingen). Tevens is het mogelijk om een keuze te maken voor handpompen inclusief een drukbegrenzingsventiel.

Double acting hand pumps (the pump delivers oil both pushing and pulling the lever) suitable to operate single acting applications. They can be fitted also onto tank and are equipped with tapered lowering valve. These hand pumps can have 3 different sizes to perform various applications and to achieve smo-other loads on the lever. They are available with nodular cast-iron body zinc plating +sealed and nickel-plated spool.

Oudshoorn hydraulics beschikt over een compleet pakket met handpompen (PMS) en (PMI) uitvoeringen die standalone kunnen worden toegepast maar ook worden uitgevoerd met oliereservoir. Elke handpomp levert opbrengst bij zowel trekkende als duwende beweging, daarnaast is het mogelijk om een handpomp te kiezen met ontlastklep (voor enkelwerkende toepassingen) of met stuurschuif (voor dubbelwerkende toepassingen). Tevens is het mogelijk om een keuze te maken voor handpompen inclusief een drukbegrenzingsventiel.

Double acting hand pumps (the pump delivers oil both pushing and pulling the lever) suitable to operate single acting applications. They can be fitted also onto tank and are equipped with tapered lowering valve. These hand pumps can have 3 different sizes to perform various applications and to achieve smo-other loads on the lever. They are available with nodular cast-iron body zinc plating +sealed and nickel-plated spool.