Nederlands
English
Deutsch
Pricing
SKU
P1.48680
Stock
14
Your price
€ 286,60
Shown price does not include VAT
Categorie
Merk
Zoek code
ALM2R6E1
Specifications
Flange
European 4-hole mounting
Axle type
conical dia. 14,7mm
Connection
standard European port
Turning direction
both
Displacement
4.5 cm3/rev
Flow at 1500 Rpm
6.4 l/min
Extra
| Build type | gear motor |
| Max. torq shaft | 70±4 Nm |
| Medium | hydraulic oil |
| Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
| Temperature range | -10⁰C +80⁰C |
| Pressure continuous | 250 bar |
| Max. pressure intermittent | 240 bar |
| Max. peak pressure | 270 bar |
| Max. revs | 4000 rpm |
| Min. revs | 800 rpm |
| Volume efficiency | 95% between 1000 - 2000rpm |
| Shaft thread | M12x1,5 |
| Shaft length | 35 mm |
| Shaft length inc. fitting edge | 40 mm |
| Height fitting edge | 5 mm |
| Dia. fitting edge | 36.5 mm |
| Center inlet - front | 45.5 mm |
| Front - back excl. fitting edge | 93.5 mm |
| Thread mounting bolt sunction side | M6 |
| Size bolts sunction side | 30 mm |
| Thread bolt press side | M6 |
| Size bolts press side | 30 mm |
| Dia. mounting hole front | 8.5 mm |
| Size mounting holes front | 71,5x96 mm |
| Dia. drain connection | 1/4" BSP |
| key width | 4 mm |
| Material front and back | aluminium |
| Material housing | aluminium |
| Material seal | NBR |
| Material gears | special hardened steel |
| bearings | yes |
| Sound level | middle |
| Shaft load 1 (Max. torq) | 200 Nm |
| Flange | European 4-hole mounting |
| Shaft type | conical dia. 14,7mm |
| Connection | standard European port |
| Turning direction | both |
| Displacement | 4.5 cm3/rev |
| Flow at 1500 Rpm | 6.4 l/min |