Pricing
Category
Brand
Search code
GHP2BK2R16E1
Specifications
Flange
BK2 with fitting edge dia. 50 mm
Axle type
conical 1:5 with key
Connection
DIN port
Turning direction
both
Displacement
11.5 cm3/rev
Flow at 1500 Rpm
16.4 l/min
Extra
Build type | gear motor |
Max. torq shaft | 70±4 Nm |
Medium | hydraulic oil |
Viscosity range (Cst) | allowed 6-500 recommended 10-100 start-up 2000 |
Temperature range | -10⁰C +80⁰C |
Pressure continuous | 280 bar |
Max. pressure intermittent | 295 bar |
Max. peak pressure | 310 bar |
Inlet pressure | 0,7 - 3 bar |
Max. revs | 4000 rpm |
Min. revs | 600 rpm |
Volume efficiency | 93% between 1000 - 2000rpm |
Shaft thread | M12x1,5 |
Shaft length | 33.3 mm |
Shaft length inc. fitting edge | 40.5 mm |
Height fitting edge | 7.2 mm |
Dia. fitting edge | 50 mm |
Center inlet - front | 44.7 mm |
Front - back excl. fitting edge | 100 mm |
Thread mounting bolt sunction side | M6 |
Size bolts sunction side | 40 mm |
Thread bolt press side | M6 |
Size bolts press side | 35 mm |
Dia. mounting hole front | 10.5 mm |
Size mounting holes front | 60x60 mm |
Dia. drain connection | G1/4 |
key width | 3 mm |
Material front and back | cast iron |
Material housing | aluminium |
Material seal | NBR |
Material gears | special hardened steel |
bearings | yes |
Sound level | middle |
Shaft load 1 (Max. torq) | 180 Nm |
Flange | BK2 with fitting edge dia. 50 mm |
Shaft type | conical 1:5 with key |
Connection | DIN port |
Turning direction | both |
Displacement | 11.5 cm3/rev |
Flow at 1500 Rpm | 16.4 l/min |